| Q: |
How
much Royal Onyx™ should be used when assembling clubs? |
| A: |
Typically,
the amount used will depend on the tightness of the fit between hozel
and shaft. Royal Onyx™ should be applied so that both the hozel and
shaft are completely covered. Typically, 0.6 to 1.0 grams of adhesive
will be required depending on tightness of the fit.
|
| Q: |
How
quickly can I play with a club assembled with Royal Onyx™? |
| A: |
Most
clubs are playable within 45 minutes from the original application. Again,
loose fitting clubs do take longer to bond and may require up to a 6 hour
cure.
|
| Q: |
How
many clubs should I expect to complete with Royal Onyx™? |
| A: |
Typically,
a clubmaker can complete up to 75 clubs per one bottle of Royal Onyx™.
The number will vary depending on the tightness of fit between shaft and
hozel.
|
| Q: |
How
do I remove Royal Onyx™ from skin or club head? |
| A: |
Cured
or un-cured Royal Onyx™ can be easily removed with acetone.
|
| Q: |
How
easily is the club head removed when it becomes necessary? |
| A: |
Royal
Onyx™ holds a strong bond up to 230 degrees F. To remove a club head
from the shaft, the hozel must be heated past this temperature. An electric
heat gun or propane torch will both work well.
|
| Q: |
Are
there any other uses for Royal Onyx™? |
| A: |
Yes. Royal
Onyx™ will bond any close fitting surface including metal, graphite,
plastic, wood, and rubber. |
